ExRx.net
http://exrx.net/forum/

DIY Extreme outdoor pullup bar
http://exrx.net/forum/viewtopic.php?f=20&t=8889
Page 1 of 1

Author:  Extremistpullup [ Tue Jul 03, 2012 3:46 pm ]
Post subject:  DIY Extreme outdoor pullup bar



Pull up bar supplies

Two 4x6 x 10ft 37.14
One 1 x 72 Gas Pipe 22.48
Three 50 lb Quikrete 14.94
Two 1 inch floor Flanges 19.92
One can Paint 3.98
One 1 3/8 Steel Flat Bit 5.65
Eight 2 inch x 1/4 bolts & washers 3.12

Total: 107.23

Notes:I recommended a drill guide 29.96. If you do not want to drill a hole. Screw the flanges onto the pipe at each end. Have a muffler weld the pipe to the flange ($20.00 or less). Bolt to the insides of the post with eight 2 inch or more inch hex crews.

http://extremistpullup.com/do-it-yourself/

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/